vaporesso gen mod swag target gtx vape zero luxe review

In this review, I’ll look at the goal vapeciga vaporesso gen mod – mod pod sub-ohms. Vapesourcing sent my goal PM80 for the purposes of this review, be sure to check their website for the latest equipment generation vaporizer the best price. For more information about destination PM80 Vaporesso

 

Specifications and features

Size: 102mm * 24.8mm * 33.4mm

Battery: Built-in 2000mAh

Output Power: 5-80W

Cartridge capacity: 4 ml / 2 ml (TPD)

Display: 0.96 “TFT

Load Current: 2A

Charging Ports: micro USB

the coil resistance: 0.2Ω GTX Mesh coil (45-60W), GTX 0.3Ω Mesh coil (32-45W)

Color: Red, Green, Black, Blue, Brown, Silver

What is in the box

Battery 1 x VAPORESSO OBJECTIVE PM80

2 x VAPORESSO OBJECTIVE PM80 POD (4 ml)

1 x GTX mesh coil 0.2Ω

1 x GTX mesh coil 0.3Ω

Airflow 2 x silicone plugs

1 x USB cable

1 x User

Warranty Card x 1

1 x map Reminder

 

plan

PM80 target has the same elegant appearance swag mod show new are known. The PM80 has a metallic finish and color TFT display polished measuring 0.96 inches generous. True, PM80 is a fingerprint magnet, but still looking for a wonderful device.

 

The PM80 is available in six different colors. A version of silver with a geometric pattern on the handle, as well as carbon fibers and the version of the resin. With a height of 102 mm, target PM80 has a similar shape to other popular sheath mods, as Vinci and Voopoo Boost Aegis.

 

screen

PM80 destination screen deserves special mention. This is one of the largest screens in a pod mod, and even includes an option to change the color scheme. 0.96 inch TFT screen very sunny and bright, with all the information normally found on full-size model.

 

axons chip

PM80 Target Chip Axon Vaporesso this card, which is the same chip and Swag Mod Gen II, which I recently reviewed. Axon The chip is equipped with various features including pulse strong enough mod, which provides constant power to breath. VW mode smarter detecting coil resistance and provides different power readings recommended on the screen.

 

The PM80 has a menu with several options mod normal size. You can choose to run PM80 mode watt variable voltage or variable. There is also a breath meter that gives you a weekly view of daily breathing. Another great feature is a super fast shutter speed 0.0001 seconds. All these features make the target more PM80 feel like a full-size model and less like a pod.

 

drums

Vaporesso was an integrated battery PM80 Meta. The battery has a capacity of 2000 mAh, which is pretty cheap compared to the previous pod mods. The only drawback with pulse mode is that the battery will run faster. A PM80 in the use 60W without pulse mode is obtained about 000 inhalations a single charge.

 

PM80 is charged by the micro-USB and has a fast charge current is 2A. I found in the Swag II after the performance at 20% was a marked reduction in energy production is the same as PM80. This feature protects the battery discharge, but it means a total capacity is somewhat reduced.

 

PM80 objective has no effect, so you can not use the unit while charging. But with fast charging 2A takes 43 minutes to move 20% of its capacity. I like that the screen even tell you exactly how long until full load, is a feature I would like more integrated battery device could have.

 

coils

PM80 objectives sheath mod known sub-ohms. Vapeciga vaporesso target have different coils GTX are available that are compatible with PM80 Target and other pods as Vaporesso, Target PM80SE, PM30 and GTX Objective One. Objective PM80 was designed with vapers direct ii lung in mind and compatible with all coils covering the GTX. There are two styles of mesh with the resistance of 1.2Ω coil and rollers MTL DTL DTL and restricts available coils ,.

 

Each coil GTX has a lattice structure and is made in two nichrome or Kanthal. The RBA is also available for those who like to tinker them with a resistance of 0.7Ω recommended. Coil with a mixture of hemp and cotton nonwoven fabric for long lasting flavor. Vaporesso offers a choice of two coils in the box, the best GTX 0.2Ω and 0.3Ω vaped to better GTX vaped 45-60W to 32-45W.

 

sheath

Included in the box are two pods, each with a capacity of 4 ml. Each pod has a falling drop owner PM80 and fill the bottom. There is a rubber stopper spare in the box if broken or lost. The coils are easy to install and helps place the rubber O-ring. The coil is suitable sheath firmly, but I realized after a few days of use, there is little visible residues juice in the battery contacts.

 

It is easy pod filling, and the hole not bottle its board of adjustment problem. Replacement pods can be purchased separately in packs of two. 4 ml capacity is great, especially because it is a high ohm watt mod to find Pod recharge more often than usual. Magnetized pods and easy to clip in and out of the battery. However, a very strong magnet so you should have a problem with your fly pod if it falls.

Power

Target PM80 capable of maximum output power 80W. For most users secondary feed tank ohms is sufficient and comparable to single or double-18650 mod. But it is important to note that most of the power coils only recommended GTX 60W networks. The only way that you will be able to use the maximum power PM80 if a coil is used RBA.

 

The bottom line

Vaporesso recently she released version of a single destination call 18650 SE PM80. This version has the same chip and design and appearance. If the PM80 is also compatible with the GTX coil. However, PM80 SE has a vertical screen that is smaller and has no color. 18650 This may be due take some screen space.

 

I really like using objective gtx vape get code because I built in the comfort of the battery. But if you want a little boost to value the ability to see the target PM80 SE. If you want to experience the full 80W, then it is definitely worth buying the RBA coil. GTX coil offers enough good taste and promises to be durable. steam with a target PM80 is up to the sub-tank ohms popular. What makes PM80 attractive to a wider range Vapers is that it was designed specifically for vaping directly lungs.

 

Pro

Objective PM80 is a great looking mod pod, a colorful and elegant design.

The PM80 has an action and a comfortable size makes it perfect for travel.

Axon offers several advanced features chip that really helps in pulse mode and Smart VW.

4ml of large capacity, much larger than other sheaths and the right to use the sub-ohms.

The large TFT color display, and provides all the information you need.

VW intelligent and truly useful function impulses, the PM80 is more like a full-size model.

counter

With the coil 0.2Ω have had some initial problems with it in good contact with the battery. It is important that the coil enough is inserted into the vessel to prevent leakage or read any resistance.

Although target PM80 mesh capable 80W all coils are rated for a maximum of 60W. So if you really want to make the most of PM80 RBA coil must be purchased separately.

After several days of intensive use, I noticed a leak in the battery contacts, more than what I have experienced in other filling of the lower pods, but definitely something you should keep an eye on. PM80 chain Target will bring vaping juice is hot and therefore thinner that is what can cause leaks.

 

From the vaporesso luxe click in the camera, you can see inside the magnet slot and can see the connection here. Also on the upper side of the mod you can see the three holes on each side of the airstream. Typically, you receive the airflow 4 is needed and you can adjust the airflow. In the device, you can see the USB port can be used to charge the battery, the device supports Charing 2A. The device is powered by a battery and can be 18,650 top view of the battery at the bottom of the mod. As for the battery cover it works well and when placed in the battery when the device is stirred noiselessly. In front of the camera, you can see the shutter button, the screen and the plus and minus buttons. shutter button is highlighted and so far it works very well, plus and minus buttons are also very good. In this device, the screen is 0.96inch and not a color screen that some people like and someone does not like, screen brightness anyway is very nice and you can see everything on the ‘screen. This device can be used 5-80w.

To activate it you must click 5 times on the fire button and turn it off, you must do the same. When the screen is on, you’ll see:

 

– The percentage battery indicator

– process

– coil resistance

– against the coup

– W

– Best

– hojaldre time (when the shutter button pressed)

 

To enter the menu, you have to keep the plus and minus buttons, and the enter the menu, you can see:

 

– Intelligent vw

– Vw

– Vv

– default

– Departure

 

In this device, we can use this mode vv know a lot of people, and the way they work here vw smart and when this mode is used, the device automatically adjusts the power of the coil has joined the work.

You can lock the device when you click 3 times on the shutter button, you should do the same to unlock the device. When you lock your device can vape but you can not use the plus and minus buttons.

When the shutter button and press the button again to return to the screen.

 

My spirit:

 

Thus,vapeciga vaporesso zero is available in 6 different colors. The design of this device is really good in my opinion, the same as the previous version and the build quality is good and there is no complaining, everything is as it should be and you can not hear the clatter when you put in the battery. The same as the goals of the previous version PM80 comfortable to use and feels good in the hand. This package is really good, all in all, you will receive more with another device, you will receive 4 records airflow, two balls and two coils that are truly amazing. funnel practical to use, but you can not use drip tips here other will be a con for someone. The capacity of 4 ml which is a good capacity for this device. You can refill the cartridge without any problems with gorillas and cartridge bottle remains perfectly in place. The screen here is different and it is not a color screen as in previous versions, but the screen brightness is good and you can see everything on the screen. In this unit, you can adjust the air flow using the out of the box, it can be very uncomfortable, but it is a big pro that we can adjust the air flow. We can stop the flow of air from one side or both sides, you can also cut the sheet and include only one or two holes if you like. There are many completely open air flow and when when you stop the flow of air in fact, you can have a random mtl out really nice. With this device, you will receive two rollers and the device is compatible with many rollers. Also for these devices, you can buy a big RBA head. Thus, this device is compatible with the 0.2ohm coil nets, nets coil, coil 0.6ohm nets, the nets coil, the coil and the RBA 1.2ohm coil. As I said in a previous post I tried many coils with this device and I can say that the coils Make really good. Coil for MTL is also very good in my opinion. It’s really good that you can buy or MTL coil DTL for this device and therefore the device will appeal to beginners. With taste really good premade premade coil and the coil Absolutely brilliant. Build the head of the RBA is very simple and remember that this is a beginner starter kit can use premade coil and after learning how to build and save RBA really good money. Season with RBA coil was also very good and the air flow in the coil hole is about 2 mm, you can use it to limit Mtl RBA or DTL vaping, perosanlly I want to use this coil to limit DTL vaping. I think this is another device vaporesso really good and user friendly device, many coils are available and you can now use the battery 18650 whcih was great, I personally really the device.

 

The inconvenients:

 

– Do not use more tips drop by drop

– No c usb

 

pro:

 

– Choice of colors

– Good build quality

– Device comfortable

– 18650

– 4 sockets flow the air within the package

– Two coils in the package

– Two cartridges in the package

– Capacity 4ml

– Easy to fill

– Cartridge nice stay in place

– good screen brightness

– Button Fire and plus and minus buttons that good

– operation Vv

– vw Intelligent mode

– Good taste

– You can use it as MTL or DTL device

– RBA head

 

You can buy here: Vaporesso https://www.vapeciga.com/collections/vaporesso

sourcemore thanks

Leave a Comment