Review of vaporesso vapes gen swag pm80 gtx mods zero pod luxe kit

Vapeciga vaporesso gen kit come in various colors:

– Black
– Midnight Blue
– White
– money
– Green
– Red and blue

Specification:

– filling of the tank capacity: 5 ml / 2 ml
– Output Watt: 5-100W
– Resistance Range: 0.03-5ohm
– Simple Battery: 21700/20700/18650
– Load current: 2A

In the box:

– Armor Pro Mod
– 18650 Adapter
– the baby tank CASCADE (2:05 ml)
– mesh coil (0.18O) already installed
– GT CCELL2 coil (0.3O)
– USB cable charging
– Manual

Baby Cascade reservoir sub-ohms can be purchased separately in different colors:

– money
– blue
– Rainbow
– Gold
– Black
– O bright

Vaporesso swag mod show new cascade sub-ohm baby is very similar to reservoirs cascade sub-ohms, but there are differences and different capacities

I received a baby waterfall in black and looks good in my opinion. You can see some details on the plastic cap and can see the same details in the control ring airflow. In addition to the air flow ring, you can see engraved “Vaporesso” and the bottom of the tank, you can see engraved “Waterfall Baby” and “Designed and manufactured by Vaporesso”. Sub-ohms tank diameter is 24.5 mm, top 58 mm with advanced drops, the cascade high capacity of 5 ml, or can buy a releasability 2ml tpd.

Cascade baby comes with an advanced Delrin 510 falls for 2 or ring on it, final dripping is a very nice place and is acceptable for use. 510 can be used by advanced drip else here without any problems. drop height drop point is 10 mm, the tip diameter is 13 mm drops.
Just below the peak falls into a plastic part, the parts here to fix the system top fill are blocked and that the plastic parts is not possible that the upper cover can be opened to chance, which is very good. In plastic parts, you can see the design that will be easier to pick up the pieces and pull up. You can unscrew the plastic part, but has a reverse thread. If you open the top of the section, you can see below a piece of metal and you can see how the work to fill here. Top filling here is very interesting and something different bits of another tank. For the filling, you need to take a piece of plastic and pulling up and you can save, also on the upper deck, you can see where you have to push to open. Holes for liquid mail is fine, maybe you will not have trouble filling the tank.

tank cascade with a glass tank, this tank has a capacity of 5 ml, it was very good. In the package, you receive a spare glasses in case of rupture of one.
To change or clean glass tank, unscrew the cap and houses, we also have here the reverse lead. Participating in the tank ohms, you can see how the actual e-liquid passes the coil. In this tank, liquid will also be under glass under glass can see the three slots in the liquid and lowering E supplying the coils. As the manufacturer is, how it would be more efficient removal with little chance of success can produce dry. Now, the more you will be able to see the rest of the tank can not in this way, a person of e liquid, but you can always change the tank down and you can see the remaining liquid mail.

Cascade baby has two coils in the package. GT preinstalled coil mesh, the coil resistance is 0.18ohm come with power and coil 50-85watts recommended. CCELL receive coils as an alternative coil, the coil resistance is 0.3ohm, 35-50watts force recommended to the coil. In addition, you can buy several types of baby ohm coils cascading secondary tank:

 

– GT1 0.2ohm 50-70W
– GT2 0.4ohm 40-80w
– GT4 0.15ohm 30-70w
– GT6 0.2ohm 40-100W
– WP8 0.15ohm 50-110w
– GT CCELL 0.5ohm 20-32w

The vapeciga vaporesso pm80 is also compatible with babies animals of the coil, which is a professional network.

To change the coil needs to unscrew the base, the base has a standard thread and bolt coil at the bottom. Put it here. As usual before refueling, it should be special coil with a few drops of messages rap to prevent and after a tank that can be filled and used immediately. Coils works well with liquid and use vg-pg 70-30 and leakage.

Based on the control ring airflow and can see some details about the ring that helps fit. ring airflow control 3 holes, you can see the airflow and here we have a cap, what is good, what does not fit on one side, there will be a partner on the other side.

How tank cascade working sub-ohm baby

First, what I want here over filling the tank, to fill the tank it is very easy and I like the fact that there is no chance you can open the possibility of charging, which just released parts plastic and boost the hand, when only fill the reintroduction of plastic parts and ready. About coils that have received the package, two coils work well. With the coil CCELL there is much less airflow, but the thread of a batch flow rolls air GT, so if you want a coil tight loop CCELL for you, but if you like a lot of airflow mesh want more coil.
steam production in very good secondary reservoir ohms to force recommended, of course, more steam coils networks, but also have more power to him. solid feel, I think it’s better with a spool of thread, but you can feel better with CCELL coil. In addition, no leakage here.
What can not like this is when you want to change the coil, for example, must have a metal part of the tank and unscrew the base, because if the glass is maintained or even a fireplace without a roof deck with the base to dump thread.
What you want here is very easy and safe without the possibility of filling can be unscrewed fine mesh spiral random system that gives the feeling of a very solid build quality was pretty good and handsome tank,

Gtx mods for https://www.vapeciga.com/products/the-vaporesso-gtx-one-vape-mod

Pro Armor is in my opinion a very good mod, which is highly subjective, but it looks amazing. Mod supports three types of batteries with adapter 18650, 20700 and 21700. The package will be 18650 battery adapter if you have a larger battery, you can use the mod works between 5-100w 18650, resistance coil that can be used 0.03- 5ohm. 108G mod weight without battery size and mode of 38.5mm x 27mm x 86mm. You can buy armor pro in 6 different colors, I have a good appearance of the black color and quality so far, there are no scratches on the model, the build quality is also very good.
Vaporesso armor Pro has a Board of Directors 4.0 Omni and very fast, just 0.002s.

From the top you can see the relationship mod crimped stainless steel, because here is very good and here you can see a gold plated spring pin 510. You can see a strange design 510 connections and here mod will not be removed from the atomizer. You can use here every atomzier diameter of 26 mm without being false.
We have some details about the mod on both sides, you can see engraved “Armor PRO” and behind the mod that you can see engraved “Vaporesso”. Always on the side mod you can see USB port for charging and improving deivde, 2A fast charge mod operator.
In front of the mod, you can see the buttons select the shutter button on the screen, buttons and more and less.
Here there was nothing soft keys, very clicky, everything is here. What is interesting here is the shutter button, a large bar on the screen is a shutter button, which I think is very interesting and useful. Shutter button very clicky and very convenient to use, you can hit anything you feel like, I really like the shutter button. Fire Buton worked very well and there missifres all. We had a nice color screen, with a lot of information here. The screen is very beautilful but the brightness of the screen is very low, especially when out of the dark bar at the top of the screen, which reduces the brightness of the screen. When you were in the room, basically all you see is very good, but when you get out, it could be a problem.

To activate the mod must click five times on the shutter button, the same should you do when you want to disable.
When the lights watt mod mode, you see:

– The battery indicator
– Preheat mode and
– Strength, which seems amazing here
– coil resistance
– against coup
– Volt
– Time vaping

On the screen, you can view all the information you need, really.

To lock the device, you need to zero vape pod click in the shutter button, the same you have to do to unlock the device

When the model is locked, you will not be able to use the plus and minus buttons, but still able to use the shutter button and the vaporizer. When the device is locked when each key is pressed as a small screen, you’ll see how to unlock the device and how to turn it off. When the Department of Defense is off the screen, you can see the map and software versions.

At the press again and the same button shot on the screen, you’ll see the clock, but after a few seconds does not use a mod you can see the clock on the screen. If you press the select button and the shutter button on the screen at the same time you will see a version of the software, if the keys are pressed simultaneously more and less show a mod left position.

To adjust the power consumption of plus and minus keys and the increase or decrease in increments of power of 0.1 W, but if the button is up or down in increments of 1 mg is maintained.
To enter the menu, you must hold the Select button or press the Select button 3 times.

From the menu, you can see:

1. Exit
2. VW H
3. VW N
4. VW S
5. CCW
6. SP
7. VV
8. CCV
9. SS
10. NI
Eleven.
12. M1
13. M2
14. BP
15. Ensemble

To move, you have to use more or less the button when you want to enter the submenu press the Select button to press the shutter button to exit.
This mod also has a way of knowing many as VV in SP mode, can use the coil resistance of 0.03 ohms.
If a set of sub-menu is selected, you can change many things. First, you can set is the clock, you can choose between analog and digital clock, and can set the time and date. You can adjust the brightness of the screen, it was nice to have this option, but it probably will not be used here for the brightness of the screen even when set in the dark due to its bar maximum brightness. You can also reset the counters surfing and you can see the time and whistles here against. You can change the subject, basically, you can change the colors of the screen, you can choose between orange, green, blue, yellow and red. Then we have the smartest option, if enabled, whenever the leg of a new atomizer in a mod, mod automatically adjusts the power to the coil. The next option is the option Auto, which sets the automatic preheating. You can also set the time display, you can set the clock when it disappears from the screen and can be set between 60 min-3. Here you can see the version and the last option is the default.
Thus, in this model, we have a lot of options that I like, the menu is very good and can basically configure what you want here.

As I said, this mod is one of the get code vaporesso luxe kit out there, I really like how it looks, mod is very good in my opinion. Another option you might here is pre normal, when connected to a pre never normal when the shutter button will give more strength a little and fall a little, which means they will draw a quick rush, but if you do not like it, you can put a soft light. chips work well, omni board 4.0 is very good, I use this mod without any problems, everything works as it should. This view is very nice with lots of information, but I like to use the shutter button is transparent to the brightness of the best, I personally do not care, but it would be best for you.
Mod supports three types of batteries which is perfect for me because I want to use batteries pro armor mod 21700. Vaporesso very comfortable, feels good in the hand, one of the most comfortable mods out there trust me, it is very convenient to use and maintain. It is true that the model has a black screen, but I still love it because of the way he looks and all information on the screen here, we also have a lot of choice and personal as the same parameters.
I think the armor pro mod is very good and I recommend it.

You can buy it here: vaporesso vapes https://www.vapeciga.com/collections/vaporesso

sourcemore thanks

Leave a Comment