Invader 4X Kit By Teslacigs Experience

Introduction

The Invader Teslacigs 4X kit is the latest addition to their range and supervision Invader Invader IV. This kit is decent with 4X Invader GDR, East Germany. This is a VV mod to adapt to the potentiometer, the output voltage, the power output of 280W max. This mod is very light and has a very pleasant feeling.

This kit is available in 5 different colors, white, black, blue, and red.

It also has some security features in are: Over-Puff protection, reverse polarity protection, short circuit protection, Undervoltage protection, overheating protection, and protection against overcurrent.

Mod Specifications

  • Dimensions: 88mm x 52mm x 26mm
  • Material: PC + ABS
  • Weight: 75.5g
  • Battery: 2x 18650
  • Maximum Output Wattage: 280W
  • Voltage Adjust: I-V Level
  • Output Voltage Range: 3V-8V
  • Maximum Output Current: 53A
  • Resistance Range: 0.08Ω-3.0Ω
  • Input Voltage Range: 6.4V-8.4V
  • USB: 5V / 1.5A

RDA Specifications

  • Height: 34mm
  • Diameter: 25mm
  • Weight: 24g
  • Drip Tip: 810

What’s in the box?

  • Invader 4X Mod
  • Invader 4X RDA
  • 2 Coils
  • O-Rings
  • Accessory Bag
  • Organic Cotton
  • USB Cable
  • User Manual

Operation Intro

There’s not really much to say, as this mod to use because it has a fire button and a potentiometer.

To turn on / off, just click on the 5 usual fire button.

You just need to change the potentiometer to the point where you’re like most, you evaporate because when the button on me, for obtaining 3 V and if you put all the way to V can be obtained from 8V and the structure you have in the mod, you will get a watt. In the case below the battery voltage, the mod will spend a maximum output voltage of the battery and you can not adjust the voltage on the mod itself.

If you are not sure of the amount of energy you get, you can always vape the computer on how to use a steam engine.

There are LED under the button flashes 5 times arranged when the camera is turned on. It also displays the remaining battery life and displays an error that is detected. When light sharp blue LED, the battery is between 100% and 61% if the LED green light indicating the battery is between 60% and 31% is, and when the battery is less than 30% of a red LED light.

Tesla Invader 4X Kit

Related Products: Teslacigs Punk, Teslacigs Punk Replacement Pod Cartridge

Recommended Brands: Uwell, Moti, Teslacigs, WISMEC

Leave a Comment